Tag Archives: replace wiper blades

Rear Windshield Wiper Blades Replacement Or Not

Most of the drivers will only be concerned with the normal operations of their windscreen wiper blades at the front of the car, very few actually actually take notice of the rear windshield wiper blades. In fact, not many people actually use their these wiper blade at the back of the car until they need to.

The rearscreen wiper blade is actually as important to the driver as those in front. Though drivers are more concerned with their visibility in front, it is also important to know that a clear view of the back of the car is needed while driving.

Due to the obscure nature of the rear window wiper, many car owners tend to neglect it and not take care of it. They usually fail to notice that it is time to replace the wiper blade until its too late. To know when to replace the rear wiper blade is simple, you just have to note if the swiping is clean. If the blade is leaving streaks of water after swiping, then the rubber has probably worn out and needs replacement.

Rear windshield wiper blade is usually much shorter compared to those in front. Front wiper blades are typically 16 inches and above in length, those at the back are only 11 to 14 inches. They are also cheaper than their longer counterparts. You can get one for less than $10 easily. You can consider rubber or silicone wiper blades, their comparison can be read here.

Check the condition of your rear wiper blades today and replace it if necessary. Do not wait until you are driving in thunderstorm to know that you need a clear view of the back of the car. Blind spots are dangerous, so try to reduce it when driving. It is all in the name of safety.

Recommended Windshield Wiper Blades For Winter

Driving during winter has always presented a different set of difficulties for drivers compared to summer or spring time. This problem is mainly due to the sub-zero temperature that the car is exposed to during the whole season. Besides having to change to tires for more surface grip, drivers also have to remember to switch your wiper blades to one that is more for winter use. It is all in the name of safety because wiper blades not made for winter will malfunction when you need it and this will affect your visibility when driving.

Reasons To Swap Wiper Blades

Most of the wiper blades used by cars are actually made of rubber, these will function normally during spring and summer. However, once we enter winter, the performance of rubber deteriorates rapidly because this is not a material that withstands cold as well as silicone. The rubber wiper blades will become stiff when exposed to freezing temperatures. The stiff blades can do more harm then good, not only will it not able to clear away the snow and particles on your windscreen, in worst cases, it might even scratch your windshield.

What To Look For In Winter Wiper Blades

With so many problems associated with using with using rubber wiper blades, what should you be looking for when considering a winter wiper blade? First of all, the wiper blade has to be made of materials that can withstand the harsh temperatures in winter. This is to prevent it from hardening. A common material used for winter purpose is Teflon-like. This will not freeze and still be able to flex to swipe the windshield clean of snow and particles. Moreover, such blades have a protective coating on the its frame that prevent snow and ice from forming on it.

It is recommended to change wiper blades every 6 to 9 months, so your normal wiper blades should last you through the year before changing to the safer winter purpose ones. If the old ones are still in good condition, you can keep it and switch back again after the winter season.

View The List Of Recommended Wiper Blades For Winter HERE

How To Keep Your Wiper Blades In Good Condition To Last Longer

Most wiper blades have a lifespan of 6 to 9 months before you will see the need to replace it. Silicone blades usually last longer than rubber wiper blades. However, the lifespan is largely dependent on how you use the wiper blades and maintain it so you could get your money’s worth.

Please Do Not Do These

Most drivers will find it a convenience to use the wiper blades and swipe off any residues they see on their windshield. However, swiping on a dry surface has detrimental effects on the wiper blades. Dry surface will produce more friction when swiping wiper blades and this causes more wear and tear to the blades. This problem is exacerbated during a hot weather. The UV rays is already damaging enough to the blades. The additional heat will damage the wiper blades faster.

You also should not use the wiper to remove dirt and grime accumulated as these grainy materials can wear off the blade edges faster. It is also not advised to swipe ice or snow on the windscreen as these will cause deformity to the blades. Snow is also heavy and causes much stress to the whole blade system.

Solution To Maintaining Wipers

Most of the damage done to the wiper blades are due to it operating in dry and hot conditions. All it needs is windshield washer fluid to make swiping smoother for the blades. You can easily purchase one bottle of washer fluid from gas stations. Mix it into the storage tank located under the bonnet of the car.

Though wiper blades are cheap accessory, it plays an important part in driving safety. Do not wait until its worn out before you realize the need to change. The best way is to use it appropriately to prolong its usefulness. Not only is it cost efficient, it also gives the driver a peace of mind.

Wiper Blades Troubleshooting Guide

The windshield wiper assembly is generally a trouble-free, reliable unit. The most common problems that arise when the wiper blades are not working properly. Wiper blades are exposed to weather extremes, rain, dust, snow and debris, apart from a host of other pollutants. They are generally made of a rubber-based compound which over a period of time becomes hard and brittle. When the wiper blades reach this stage they are unable to clear the windshield properly resulting in a streaky or dirty windshield. Another problem is that hard wiper blades can cause irreparable damage by scratching the windshield. Here is a list of common complaints relating to wiper blades:

Problems That Can Happen With Wiper Blades

  • Streaking of the windshield happens when the rubber of the wiper blade has dried, hardened or cracked.
  • Worn rubber which can be seen as rounding of the leading edge of the wiper blade. This indicates that the blades have served their useful life.
  • Chattering of the wiper blade along with a juddering motion happens when the rubber has developed a ‘permanent set’ or ‘curve’. A permanent set indicates that the blades have become warped as a result of having been parked too long and not used.
  • Split and torn blades are the effect of ozone and ultraviolet rays on the rubber of the wiper blades. The rubber becomes brittle and develops cracks which split and tear after some time.
  • Shredded rubber blades happen when there is excessive play because of worn or loose fitting adaptors.

If you are experiencing any of the problems described above, the solution is to replace your wiper blades.

Repair Windshield Wiper Blades

Another common irritant is excessive noise when the wipers are in operation. The way to tackle this is to inspect your wipers. Very often the problem might be as simple as dirty wiper blades. The answer is to clean the wiper blades with a solution of baking soda and liquid washing soap in warm water which generally takes care of the noise.

If the noise continues, check that the wiper blades are properly seated in the adaptors. If you have recently changed your wiper blades check that they have been properly installed using the correct adaptors. If there is a problem here you might have to replace the wiper blades or use the proper adaptors.

If you are still experiencing problems with your wiper assembly it could be because of a damaged or bent wiper arm or improper pressure between the wiper blades and the windshield. You might like to check the arm assembly and the linkage to identify the source of the problem. If the arm is bent or the wiper blade is broken, your only solution is to replace the assembly.

Even the Best Wiper Blades will succumb to the external elements. Therefore, it is advisable to replace wiper blades at least once every year though most motorists don’t do this.

How To Change Wiper Blades

Wiper blades are constantly exposed to sunlight and varying weather, and have to contend with harmful pollutants, dust and debris. After a time, any wiper blade becomes brittle and begins to tear. The result is poor wiping leaving streaks and worse, could even scratch your windshield. Experts recommend changing windshield wiper blades every six months to a year for optimal performance.

New Assembly or Refill Windshield Wiper Blades

You can replace the whole wiper assembly for best performance or you can replace the set of blades with refills which is a cheaper alternative. Refills are available for virtually all standard wipers. When buying a wiper blade replacement it might be a good idea to use the old wiper blade as a sample to make certain of the correct size. If you are deciding to buy online then check the car manual for the exact specification, or search for wipers by car make and model. Most wiper blades come with adapters which fit on practically any kind of connector. There are various different types of wiper blades available. A silicone coated, natural rubber blade will give you better and more lasting performance. Other new blades made of rubber compounds too give you more life.

What Tools Would I Need to Replace Wiper Blades?

The only tool you will need when replacing wiper blades is a flat head screwdriver.
What are the steps to take to replace a wiper blade?

    • Move your wipers to an upright position using the ignition.
    • Place an old tee shirt or cloth on the windshield to protect it if anything should accidently drop on it.
    • Turn the wipers out. If you are using wiper blade refills, first remove the old rubbers which you are planning to replace. They might be secured with snaps and tabs which you will have to open out to release the blade.
    • Slide in the refills and secure the snaps and tabs so the wiper blade refills are firmly secured.
    • If you are changing the wiper blade, remove the old wiper blade first. Every kind of wiper will have its own method of fastening the wiper blade which might be a hook or snap which can be opened with a screwdriver. Most likely this will be illustrated on your new assembly. When you fit in the new assembly, reverse the process so that it is firmly secured to the arm.
    • In some vehicles the wiper blade is different for the driver and passenger side. Make sure you are fitting the correct one.
    • Check your wipers using the windshield washers. Make sure the blades are secure and sweeping effectively.

Watch The Video below to help you understand how to change wiper blades